To make sure your calendar, event reminders, and other features are always
correct, please tell us your time zone (and other details) using the
drop-down menus below:
Set Date/Time format:
In 12 Hour format the hours will be displayed as 1 through 12 with “a.m.” and “p.m.”
displayed after the time (ex. 1:00p.m.). In 24 hour format the hours will be displayed as 00 through 23 (ex. 13:00).
You can always change your time zone by going to your Account Settings.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Visiting FSPCBA FSPCBA(username: fspcba)
Create a new Discussion Topic
Tag
Please wait...
Select a Color
Manage Applications
Check the items that you want displayed. Uncheck all to hide the section.
Calendars
Files
Addresses
To Dos
Discussions
Photos
Bookmarks
The “Switch Navigator” button will no longer be available after February 14, 2017.
Please learn more about how to use the new Navigator by clicking this link.
Creation date: Jun 27, 2022 6:00am Last modified date: Jun 27, 2022 6:00am Last visit date: Dec 9, 2024 3:19pm
1 / 20 posts Displaying comment thread
Jun 27, 2022 ( 1 post )
6/27/2022
6:00am
FSPCBA FSPCBA (fspcba)
In a PCB patch, the optical mounting point must be placed in the four corners of the PCB, usually three to find the PCB. Common benchmarks consist mainly of three types: table benchmark, unit benchmark and local benchmark.
1. Reference point structure. (1) group data point and unit data point.
Shape / size: 40 mm in diameter. FS technology supplier mask window: center the reference point and cross the reference point twice the diameter. Requires a soft or octagonal copper wire like a 2mm diameter edge protection ring. The inside of the optical mount on the same plate must be the same, i.e. there must be a copper cover under the three reference marks.
(II) local data points.
QFP and step sections ≤0.4mm such as BGA, CSP, FC require local data points. Size / shape: solid circle, diameter 40 mm. Carrier mask opening: the size is handled according to the usual board, the outer ring is not made of copper ring.
2. Set the data point: Speed technology.
General principles:
Data points must be placed on the player to operate SMT devices. The number of unilateral access points is greater than or equal to 3. Place reliable components on the component surface for one-way layout. .. When the A5I5 ^ 0L-z1m + PPCB was developed bilaterally, reference points were placed on both sides.
Except in the mirror, the position of the data points on both sides is basically the same for the data points on both sides.
(1) The reference point of the FS technology of the puzzle layout.
The board must be reliable and the hive reliable. The three boards are reliable and the unit is reliable. The edges of the board are L-shaped and as long as possible. The image below shows the area requirements of the image table. When using glass symmetrical frames, the reference point on the side must meet the repeat requirement after sliding, as shown in Figure B below.
(II) The reference point for the placement of the cell table.
The number of reference points is three and the table is distributed in L format and the distance between each reference point should be as small as possible. It should not exceed 5 mm from the reference point. If all four ends are not guaranteed to be satisfactory, the delivery end must meet at least requirement.
Attach this discussion to an event, task, or address
You can attach a link to this discussion to an event in your Calendar, a task in your To Do list or an Address. Check the boxes below for the data you want to
bring into the event’s or task’s description, and then click “Select text to copy” to have the next event or task you create or edit have the discussion text and link.
