Usually when users power it up, only the red power led comes on and nothing more.
attach a photo…and help on how to resolve this problem, from CnAutotool.com
Suggestion from experienced users:
1: close anti-virus program & disconnect internet connecton
Anti virus program oder firewall/auto protect activ
This software may disturb/block the vi- recognitoin routine of c3+.
in my case (using a passthru device) i disconnected the internet connection, deactivated the auto protect function and after starting c3+ again, the led became green….
I think to remember , you have to connect the original vi to the car and the laptop, both. Only connection to the laptop is not enough for c3+ to recognize the original vi.
2: check usb circuit on pcb and usb sockets on pc
If you have basic knowledge of checking the pcb and components internally, check the usb circuit etc. and have a try on another laptop to eliminate faulty usb sockets on pc
3: check wires, solder breaks, etc.
Use a multimeter and check for broken wires between obd plug and pcb , check for solder breaks on pcb where plugs and connections are soldered to, basic fault finding, check for pcb damage like scorch marks or discoloration and components for signs of stress or damage, use a high power magnifier.
4: check continuity
Then its a case of deeper fault finding using things like scope, function generator etc, check continuity with cable plugged into the interface in case one of the contacts is bad then follow connections as far as you can on pcb to check for breaks on the board.
Consult-3 for Nissan Packing List: 1pc* Consult 3 Plus for Nissan Vehicle Communication Module + OBD16 Cable 1pc* 14Pin Line for Nissan 1pc* USB 2.0 Cable 1pc* Casebox 1pc* HDD 160G (option)
This is an uploaded file, you cannot modify the contents of the file from the mobile client.
Customize
Name & Description
Manage File Tags
Tap on to toggle inclusion in this application.
0 / 2 tags used
Folder Options
Name & Description
Search
Attach this document to an event or task
Select a Color
Tag
Please wait...
anonymous, what time zone are you in?
To make sure your calendar, event reminders, and other features are always
correct, please tell us your time zone (and other details) using the
drop-down menus below:
Set Date/Time format:
In 12 Hour format the hours will be displayed as 1 through 12 with “a.m.” and “p.m.”
displayed after the time (ex. 1:00p.m.). In 24 hour format the hours will be displayed as 00 through 23 (ex. 13:00).
You can always change your time zone by going to your Account Settings.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
