Before using the busbar machine, check whether the plug and the power cord are normal, turn on the power, turn on the power switch, and supply power normally. There is no need to turn off the switch during normal operation. Please cut off the power when not working.

 The tension control of the bus bar processing machine and the foil strip correction are the key technologies of the foil coil winding machine. The tension of the foil ribbon of the existing domestic or imported foil coil winding machine is generated by mechanical friction. The tension is not stable enough, which will cause unevenness of the winding coil tightness, resulting in inconsistent DC resistance between the coils, and the outer diameter of the coil exceeds Poor and insufficient. When the multi-function busbar bending machine uses steel pipe as the suspender of the lamp, the inner diameter of the steel pipe should be greater than 10 mm, and the thickness of the steel pipe wall should be greater than 1.5 mm; the center line deviation of the lamps installed in a row in the same room or place should be controlled within 5 mm ; Three-phase transformer selection of suitable transformer winding machine equipment is the key to the production of high-performance transformers, the foil coil winding machine is the key equipment for winding low-voltage foil coils. The greater the capacity of the transformers used today, the greater the impact on the power grid, and the requirements for their safety are getting higher and higher. The manufacturing quality performance of the transformer requires not only reliable electrical performance, but also more reliable mechanical stability and short-circuit resistance. Stability is mainly manifested in the control of the manufacturing process of the coil, that is, the electromagnetic balance of the high and low voltage coils is required, and the axial turns are tightly distributed and evenly distributed. Therefore, the coil winding process is required to be compressed in the axial direction and wound in the radial direction. The vertical winding machine is used to take advantage of the weight of the wire cake, and the axial direction is naturally compressed, and the tension device is used to control the tension in the radial direction.

 The above is a brief summary of our company's use of the copper cutting machine. In addition, our company has won unanimous praise from customers with excellent quality and preferential prices. Our quality is trustworthy, and everyone is welcome to consult and purchase, yiwu feiying machinery equipment company.