The use of copper wire bending machine is very wide and it is closely related to its structure. It is precisely because of the perfect combination of its structure that copper wire bending machine can better serve us!Baffle mechanism: The baffle is driven by a motor, and the two screw rods are driven to move synchronously through a chain operation. The numerical control system controls the size of the baffle; Synchronization system: a mechanical synchronization mechanism composed of torsion shaft, swing arm, joint bearing, etc. of copper row bending machine , The structure is simple, the performance is stable and reliable, and the synchronization accuracy is high. Workbench part: controlled by the button box, the motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The minimum reading is 0.01 mm; the slider part: the busbar bending machine adopts hydraulic transmission, sliding The block part is composed of a slider, an oil cylinder and a fine-tuning structure of a mechanical stop. The left and right oil cylinders are fixed on the frame, the piston drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value.

Any unit has its unique function to ensure the normal operation of the machine, and each unit of the busbar machine also has its own function. Let's take a look at it together, and hope that the information provided can help everyone. Most types of bus processing machines are composed of hydraulic punching machines, hydraulic cutting machines, bus embossing machines and workbenches.

The function of the busbar embossing machine: it is used for flattening and embossing the joints of copper and aluminum busbars, enhancing the conductivity and extending the maintenance period. The function of the hydraulic cutting machine: the hydraulic bus bar machine is suitable for the wiring project of the switch box and the automatic control panel of the switchboard. The split design is convenient to carry and easy to maintain. The blade is made of high-strength tool steel, which is sturdy and durable after conditioning and heat treatment, and the surface is blackened to prevent rust. The blade design is scientific, and the cutting surface is smooth and flat. The split design does not include a pump at the factory. The function of the hydraulic punching machine: The separate hydraulic punching machine is suitable for punching L and H plate copper, copper plate and aluminum row. The bottom is designed with a flat seat, which is stable and can not be shaken. Single-hole oil return, the mold is made of high-carbon tungsten alloy steel, which can not be damaged. Specially used for perforating metal plates such as angle iron, flat iron, copper plate, etc., especially suitable for field operation in electric power, construction and other industries.