To make sure your calendar, event reminders, and other features are always
correct, please tell us your time zone (and other details) using the
drop-down menus below:
Set Date/Time format:
In 12 Hour format the hours will be displayed as 1 through 12 with “a.m.” and “p.m.”
displayed after the time (ex. 1:00p.m.). In 24 hour format the hours will be displayed as 00 through 23 (ex. 13:00).
You can always change your time zone by going to your Account Settings.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Visiting Bruce Zhu(username: busbarbendingmachine)
Tag
Please wait...
Select a Color
Manage Applications
Check the items that you want displayed. Uncheck all to hide the section.
Calendars
Files
Addresses
To Dos
Discussions
Photos
Bookmarks
The “Switch Navigator” button will no longer be available after February 14, 2017.
Please learn more about how to use the new Navigator by clicking this link.
Daily maintenance instructions for CNC bus processing machines
In order to improve the service life of CNC equipment, it is generally required to avoid direct sunlight and other heat radiation, and avoid places with too much humidity, too much dust or corrosive gas. Corrosive gases can easily cause electronic components to be corroded and deteriorated, causing poor contact or short circuits between components, affecting the normal operation of the busbar machine. The precision numerical control equipment should be far away from the equipment with large vibration, such as punching machine, forging equipment, etc.
In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous interference signals, the numerical control equipment generally adopts dedicated power supply (for example, it is divided from the low-voltage power distribution room to be used by the numerical control busbar machine tool separately) or the voltage stabilizing device is added. It can reduce the influence of power supply quality and electrical interference.
The operating procedures are one of the important measures to ensure the safe operation of CNC machine tools, and the operator must operate in accordance with the operating procedures. When the machine fails, the operator should pay attention to keep the site, and truthfully explain the situation before and after the failure to the maintenance personnel, so as to facilitate the analysis and diagnosis of the cause of the failure, and eliminate it in time. In addition, CNC machine tools should not be sealed for long-term use. After purchasing CNC bus bar machine tools, they must be fully utilized, especially in the first year of use, so that the weak links that are prone to failure can be exposed as soon as possible and can be eliminated during the warranty period. When there is no processing task, the CNC machine tool should also be energized regularly, preferably 1-2 times a week, and run dry for about 1 hour each time, in order to use the heat generated by the machine tool to reduce the humidity in the machine, so that the electronic components are not damaged. In case of damp, it can also find out whether there is a battery alarm in time to prevent the loss of system software and parameters.
Attach this document to an event, task, or address
You can attach a link to this document to an event in your Calendar, a task in your To Do list or an Address. Check the boxes below for the data you want to
bring into the event’s or task’s description, and then click “Select text to copy” to have the next event or task you create or edit have the document text and link.
