The busbar machine is wrapped in our common ordinary lacquer cables. We are already familiar with its winding process. This article is mainly about the band -shaped wrap process that rarely encountered in normal processing and use. It Mainly applied in electrical coils such as electric antibodies and filters.

The alkali erosion process is high requirements for aluminum quality and can only be suitable for pure aluminum ingots. Because the alkali erosion process requires high alkali erosion, long stripes, spots, etc. will cause long stripes and spots on the surface of the aluminum. If the producer adopts recycled aluminum plus this process, the aluminum row produced will produce a lot of harmful substances and directly produce hidden health hazards. Portable split bus

Southern Anhui Anhui Electric or Yancheng Electric (or the same quality brand motor) oil pump Taiwan solenoid valve, overflow valve Taiwan relay Schneider or OMRON contactor Schneider or OMRON button switch Shanghai Ergong Electric Factory

Sulfuric acid has the effects of reducing the activity of Yari ions, preventing its hydrolysis, improving the performance of plating, and anode current efficiency. When the amount of sulfuric acid is insufficient, Yari ions are susceptible to oxidation into a tin tin.

Portable split -type busbar machine Ranking This article is composed of three units: punching, bending and cutting. It is mainly to bend the width (10 ～ 120) mm, thickness (3 ～ 1mm of copper volleyball, bend at any angle within (90-180) °. Ensure the accuracy of the bending angle and the angle of the same batch of copper row angles. Consistency is two very important indicators in the bending station.

Applicable industries: high and low voltage switch cabinets, substations, bus sinks, bridges, electrical switches, communication equipment, home appliances, ship manufacturing, office automation equipment, elevator manufacturing, chassis cabinet manufacturing and other electrical sets of electrical setting industries.

In short, the step -step -step -step -step -steps are based on the fault, and the real causes and faults of the faulty are judged as soon as possible. These fault disposal methods do not have strict boundaries in actual use. Sometimes only one method can eliminate the failure to eliminate the fault. It may also be carried out at the same time. Its effect depends on the experience of maintenance technicians and its depth of understanding and grasp of system principles and layout. This is not only the quality that the maintenance personnel must have, but at the same time, the maintenance personnel have made high requirements. It requires the CNC parent maintenance personnel to be familiar with the layout and design ideas of the parent machine. Quickly find the cause of the fault and judge the fault position. In addition, in order to perform on -site surveying and mapping for certain circuits and parts, as a senior maintenance personnel, they should also have a certain ability to draw engineering drawings. Portable split bus

Simple operation: manual staber solenoid valve, check the PLC status indicator light machine input, output indicator light, clean the solenoid valve, use a multimeter to measure the voltage, resistance and line break, and replace the yuan device.