Of course, in order to ensure the accuracy of the machine tool, a small amount of scraping of the bed or column is essential. In most cases, installation is relatively simple. As a guided rail, it is hard -hard steel, placed on the installation plane after fine grinding. Compared with the graphic guide rail, the geometric shape of the horizontal cross section of the linear guide rail is more complicated than the graphic guide. The complexity is that the groove is required on the guide rail to facilitate the movement of the sliding components. Function.

It is mainly suitable for high and low voltage -switching cabinets and transformer manufacturing industries, which are used to process various specifications of copper and aluminum bus. As long as the user is on the corresponding processing unit, the mother can be poured, cut, and folded, respectively, and has high production efficiency. Production manufacturer of hydraulic parent line machine

The rotary bus -type shear control system requires the movement status of the hydraulic cylinder, the servo control of the three axes, and the action control of multiple gas rainbow to complete the processing task in order to coordinate the movement. The hydraulic rainbow requires three states: forward, stop, and backward; servo control is the X -axis position control in the direction of the feeding, the Y -axis position control of the module movement, and the position control of the modulus turntable; Positioning, robotic clamping, turntable positioning and turning on the board, all lust only needs to control the stretching and recover.

The busbar bending machine manufacturer, PLC and servo drive system of the hydraulic parent line machine have set up many modified parameters to meet the requirements of different machine tools and different working conditions. These parameters can not only match each electrical system with specific machine tools, but also make the function of the machine tools the best. Therefore, changes in any parameter (especially the simulation parameters) are not allowed to be lost; changes in mechanical or electrical performance caused by long -term operation of random tools will break the initial matching status and optimization state. Such failures refer to one type of failure in the first section of failure, and one or more parameters of the relevant relevant parameters need to be adjusted. This method is very high in requirements for maintenance personnel. It must not only understand the main parameters of the specific system, not only know the address of its address, but also have rich experience in electrical debugging.

In order to improve the service life of CNC equipment, the use environment of the homeline processing machine generally requires the direct irradiation and other thermal radiation of the sun, and to avoid places with too humid, too much dust, or corrosive gases. Punching, forging equipment, etc.

Through the status quo of the manufacturer of small -scale machining machines, it can be seen that the trend of the mother -in -law processing machine market is gradually obvious, and the sales of the parent processing machine depends on the quality and service. Production manufacturer of hydraulic parent line machine

Scope of application: EE type transformer, EI transformer, step motor, relay, coils, inductors, automotive ABS, switching power transformers and special products.