The anti -vibration pads are generally cooperated with the resonance cavity activity and can move freely. There is a throwing slot on the front and back sides of the vibration pad. Oil can produce damping effects when flowing to change the original flow. Due to the addition of the vibration pad, a vibration element was added, which disturbed the original resonance frequency. The resonance cavity increases the vibration pad, which also reduces the volume and increases the stiffness when the oil is pressured to reduce the possibility of resonance.

The main types of automatic bus tail seats are manual, pneumatic, and electric displacement. These three tail seats are the most common applications. From the name of the manual tail, it can be seen that it is a manual control to control the tail through manual control tail. The operation of the seat operation is generally configured on the low -end automatic bus; the pneumatic tail seat mechanism is a pneumatic type, and the artificial operation of the cylinder is used instead of the manual operation. The tail seats are all adopted by this structure; the electric displacement tail seat is generally configured in a large automatic buser. The movement of the electric displacement tail seat depends on the motor drive. Supporting force. Which one is good?

Under the wave of financial storms sweeping the global wave, some CNC busbar bending machine manufacturing companies have begun to turn their goals to the field of re -manufacturing. As a major main body of re -manufacturing and improvement of performance accuracy, the parent line processing machine CNC system is more important at this stage. The bus processing machinery and re -manufacturing can be carried out in combination with the large repair of the machine tool, but the requirements for the accuracy of the machine tools for the accuracy of the machine tools are different from that of ordinary machine tools. Meet the structure characteristics of CNC machine tools and the requirements of the automatic processing of CNC, and should have the characteristics of mass repair. It is crucial to choose a suitable CNC system, and it directly determines the success or failure of the bus processor.

The bus machining machine is equipped with three processing units: rinse, cutting, and folding. The three units can work at the same time without affecting each other. You can rush, cut, and discount processing by manual or pedal switches separately or at the same time. High production efficiency in the use of the bus processor and convenient use. With 24V machine tool lamps, local lighting.

Which one is easy to use the pedal switch to move the guide plate downward movement, before switching the switch, the upper and lower blade is in contact with the switch;

Picks: In CNC machinery manufacturing, devices used to install clip workers are collectively referred to as fixtures. In the mechanical manufacturing factory, the use of fixtures is very wide. From rough manufacturing to product assembly and testing, there are many different types of fixtures. The fixture is a bond to achieve CNC machining.

The greater the magnetic elasticity rate, the greater the noise. When the magnetic field strength is the same, the magnetic elasticity of the silicon steel sheet with good raw materials is also small, so the noise is also small. Magnetic elasticity is not related to the strength of the magnetic field. The stronger the magnetic field, the greater the noise. The magnetic elasticity of the magnetism is not yet related to painting and annealing in the name of silicon steel sheets, because the coating has adhesion to the silicon steel sheet. It can prevent deformation of silicon steel sheets. Which one is good?

Display and zero -row installation: The ground is generally installed in front of the cabinet according to the logo on the bus, which is directly connected to the cabinet; superior;