In addition, it is necessary to check whether the three -phase current current of the bus motor is balanced. The three -phase induction motor is not allowed to exceed 10 % of the uniform value of the current of the two -phase current. Work. Assume that the Passover indicates that there are shortcomings of the motor, you should check the understanding end and work after the disadvantage.

Each time the bronze row CNC busbar bending machine instructions should be replaced or completely cleaned; other filters such as related alarm or poor oil quality of the machine tool should be replaced; the air filter on the fuel tank is performed every 3 months every 3 months. Check the cleaning, it is best to replace it in 1 year.

Put the bearings in fire oil for 5-10 minutes in general cleaning method, and pinch the inner ring in one hand. The other hand changes the outer ring, and the dry oil or rust of the bearing will fall off. Then lift the bus processor axis into a relatively clean fire oil, and rinse it with fine and soft brushes. Wash the oil stain in the drum and the gap, and then put it in the gasoline once. Put it on clean paper after removing.

The audiobarer is mainly used in the electro -acoustic industry. In recent years, we found that some buyers did not understand some basic settings after buying the parent line machine, so they saw this product. This not only wastes time, but also wastes manpower and material resources. By exploring it in this industry, we have gradually accumulated a lot of experience and use skills, and summarized the following four points:

Electric (providing power to pump) → pump (generating high voltage liquid power) → electromagnetic + overflow valve (controlling first -stage pressure) → remote pressure regulating valve (adjusting secondary pressure) → induction direction valve (transmit pressure oil to every Oil cylinder) → oil cylinder (the movement of the oil cylinder, realize the rushing, cutting, and folding processing). CNC CNC processing machine manual

In addition, when the high -temperature production environment of the large torque parent wire is there, it is necessary to reduce a certain amount of processing. In addition, the heat dissipation effect of the province in this province will be greatly reduced, and the chance of failure will be much smaller.

The bronze row CNC processing machine instruction manual everyone knows that the general CNC parent line machine does not have a constant pressure piercing board. When the coil is winding, the tension of the round copper wire comes from the self -weight of the wire shaft and the grip of the winding worker's hand. Workers' operations are different due to physical decline in the first half of the period and the second half; the coil copper weights of different types of coils are winding; the coil copper weight of the same type of coils with a full line shaft and the half -line shaft is also different. Due to the uneven tension of copper wires, the shape and copper weight of the product coil will be deviated, which will affect the quality of the product. In order to ensure the stability of the motor performance and reduce the labor intensity of the workers, the constant pressure device of the parent machine was designed with the principle of pneumatic principles. It greatly reduces the labor intensity of workers and improves the quality of the copper coil.

The bus processor has three processing units: shear, punching, and bending. It is mainly suitable for high and low voltage switch cabinets and transformer manufacturing industries to process copper and aluminum parent lines of various specifications. The main functions are copper and aluminum parent lines of different specifications. You only need to use the corresponding processing unit to easily and quickly cut the copper and aluminum rows (round holes, waist -shaped holes), flat bend, flat, and bending, flat, and bending, and bending. Various processing of standing, pressure flowers, flattening, twisted twist, and voltage cable joints. It is widely used in electrical setting industry such as high and low voltage switching cabinets, substations, bus sinks, chassis cabinets manufacturing. The bus processing machine of the parent line machine factory store is a supporting equipment designed by reference to advanced foreign products and combined with domestic reality to improve work efficiency and ensure the safety of operating safety. It is an indispensable ideal equipment for the electrical industry.