Three -station bus machine offer (Hubei aluminum strip bending machine is more money)

The operator of the CNC bus rushing machine must be familiar with the main structure, performance and processing parameters of the equipment to use the machine. The machine tool is strictly prohibited to extend any part of the body into the front and rear molds to avoid clipping.

After the operation of the bare line of the bare line machine, the parent line machine must be shut down safely according to the following order: first, turn off the work button of each unit. Second, turn off the power switch on the operation disk, again, turn off the main circuit air switch. Turn off the power switch of the workshop.

High -temperature antioxidant experiment: Products processed by the above conditions, visually inspecting the thermostatic oven, the following results are obtained: temperature 50 ° C ° C 120 ° C 150 ° C 180 ° C time, 15 minutes, 10 minutes, 10 minutes, 10 minutes, 10 minutes, 10 minutes, 10 minutes, 10 minutes, 10 minutes. Change color, unintectorative color, golden dark brown chromic acid processing products, unchanging color, all golden yellow dark brown

First of all, according to the technical requirements and process specifications of the required processing products, according to the process of process and production line beats, the type of CNC busbar machine has many types on the market. The best role, the best performance price ratio.

Cereal protection, also known as protecting ground (safe ground), is to connect the metal shell of the electrical equipment with the ground body. When the electrical equipment insulation damage is damaged, the shell is directly introduced into the ground to avoid the operator's contact with the equipment shell and electric shock. The leakage protector is used. It provides indirect contact protection for the fatal and dangerous electric shock. Because it changes to the ground voltage to the action signal with a leakage current or a neutral point generated by it, it does not need to use the electrical current value to set up the action value, high sensitivity, action action, action action After that, the power can be cut off effectively to ensure personal safety.

The motor can be used for power supply, and the motor can start at a very low frequency and voltage. It can be used for various brake methods converters, which achieves frequent starting and braking conditions. In the action of the change.

The third -site parent line price is fierce in the Chinese transformer industry. Foreign -funded multinational companies have seized a large market share, and the number of domestic transformer manufacturing enterprises is also rapid. There are more than 20 enterprises with 220kV transformer production capacity in the low -end transformer market, and more than 100 companies with 110kV transformer product production capacity. The production of transformer enterprises above 500kV levels has built high barriers to enter through technology and capacity, and the market structure tends to stabilize.

A product that is used to process mechanical accessories. This product has many professional characteristics when processing. If it is not for those who run this product for a long time, it will not be found.